11
English
EN
5 Listen to radio
Note
•
Only FM radio reception is available on this unit.
Tune to a radio station
Tip
•
For the optimal reception, fully extend and adjust the
position of the FM antenna.
•
Position the antenna as far as possible from your
household appliances or other radiation sources.
•
[STEREO]
is the default setting for tuner mode.
•
In tuner mode, you can press and hold
/SET TIME
to switch between
[STEREO]
and
[MONO]
, and the
unit memorizes your setting even if you turn off the
unit or switch to other sources.
1
Press /
SOURCE
repeatedly to select FM
mode.
2
Press and hold / (
TUNE+
/
TUNE-
)
for more than 2 seconds.
»
The radio tunes to the next station
with strong reception automatically.
3
Repeat step 2 to tune to more stations.
• To tune to a weak station, press /
(
TUNE+
/
TUNE-
) repeatedly until you
find the optimal reception.
Program radio stations
Radio station presetting allows you to save
radio stations, and quickly tune to a favorite
station.
Note
•
The preset list can store up to 20 stations.
•
If the preset list is fully occupied, the screen will show
P 20.
•
When you save a radio station to a position that has
already been occupied, the original radio station will
be replaced.
Program radio stations manually
1
Press /
SOURCE
repeatedly to enter FM
mode.
2
Press / (
TUNE+
/
TUNE-
) to tune to a
radio station.
3
Press /
PROG/SCAN
.
»
A preset number flashes.
4
Press / (
/
PRESET -
) to
change the preset number.
5
Press
OK
/
DOCK 2
to save the
current radio station to the selected preset
number.
Program radio stations automatically
1
Press /
SOURCE
repeatedly to enter M
mode.
2
Press and hold /
PROG/SCAN
.
»
The screen displays [AUTO] (auto).
»
The unit starts to scan for all available
radio stations automatically, and saves
them to the preset list.
3
Wait until the auto scan finishes.
»
The first station in the preset list
broadcasts automatically.
Select a preset radio station
• Press / (
/
PRESET -
) to
select a preset number.
Summary of Contents for AJ7400
Page 2: ......
