background image

3

EN

1 Important

• 

Read these instructions.

• 

Heed all warnings.

• 

Follow all instructions.

• 

Do not block any ventilation openings. 

Install in accordance with the 

manufacturer's instructions.

• 

Do not install near any heat sources such 

as radiators, heat registers, stoves, or 

other apparatus (including amplifiers) that 

produce heat. 

• 

Protect the power cord from being 

walked on or pinched, particularly at plugs, 

convenience receptacles, and the point 

where they exit from the clock radio.

•  Only use attachments/accessories specified 

by the manufacturer.

• 

Unplug this clock radio during lightning 

storms or when unused for long periods 

of time.

•  Refer all servicing to qualified service 

personnel. Servicing is required when 

the clock radio has been damaged in any 

way, such as power-supply cord or plug 

is damaged, liquid has been spilled or 

objects have fallen into the clock radio, the 

clock radio has been exposed to rain or 

moisture, does not operate normally, or 

has been dropped.

• 

Battery usage CAUTION – To prevent 

battery leakage which may result in bodily 

injury, property damage, or damage to the 

clock radio: 

• 

Install the battery correctly, + and - as 

marked on the clock radio. 

• 

Remove the battery when the clock 

radio is not used for a long time.

• 

The battery shall not be exposed to 

excessive heat such as sunshine, fire or 

the like.

• 

This clock radio shall not be exposed to 

dripping or splashing. 

• 

Do not place any sources of danger on the 

clock radio (e.g. liquid filled objects, lighted 

candles). 

• 

Where the plug of the Direct Plug-in 

Adapter is used as the disconnect device, 

the disconnect device shall remain readily 

operable.

Summary of Contents for AJ3400/93











Reviews: