5.
After both the hours and minutes are set, press
SET ALARM 1
or
SET ALARM
2
to confirm the setting.
Helpful hints:
–
If you have selected
AL 1
(
AL
),
make sure you have properly tuned to a
station before turning off the set.
–
If you set and activate the same time for both alarms, only the
AL 2
(
AL
)
will
be activate at the set time.
–
When both
AL 1
(
AL
) and
AL 2
(
AL
)
are turned on, by default the display
shows the alarm time nearest to activation.
–
To check the alarm time setting for
AL 1
or
AL 2,
press
AL 1
or
AL 2
button.
–
It is not possible to adjust the alarm time during an alarm call or the repeat alarm
mode.
SWITCHING OFF THE ALARM
There are three ways of switching off the alarm. Unless you cancel the alarm
completely, the
24-hour ALARM RESET
will be automatically selected after 59
minutes from the time your alarm first goes off.
24 HOUR ALARM RESET
If you want the alarm mode to be stopped immediately but also wish to retain
the same alarm setting for the following day:
• Press
ALARM RESET / SLEEP
.
™
You will hear a beep tone confirming 24 hour reset activation.
REPEAT ALARM
This repeats your alarm call at 9 minute intervals.
• During the alarm call, press
REPEAT ALARM /
BRIGHTNESS CONTROL
..
™
Display shows (
AL
) or (
AL
) flashing during a repeat alarm.
• Repeat if desired (up to a maximum of 6 times).
CANCELING THE ALARM COMPLETELY
• Press
AL 1
or
AL 2
button once or more until the
OFF
appears under the
respective (
AL
) or (
AL
) icon.