Mechanical Instructions
4.
4.2
Cable Dressing Rubens Styling (9000-series)
Figure 4-2 Cable dressing 32PFL9705x/xx (applicable to all 9000 sets)
4.3
Service Positions
For easy servicing of a TV set, the set should be put face down
on a soft flat surface, foam buffers or other specific workshop
tools. Ensure that a stable situation is created to perform
measurements and alignments. When using foam bars take
care that these always support the cabinet and
never
only the
display.
Caution:
Failure to follow these guidelines can
seriously damage the display!
Ensure that ESD safe measures are taken.
4.4
Assy/Panel Removal Monet Styling
The instructions apply to the 37PFL8605K/02.
4.4.1
Rear Cover
Warning:
Disconnect the mains power cord before you remove
the rear cover.
1.
Remove the stand.
2.
Remove all screws of the rear cover.
3.
Lift the rear cover from the TV. Make sure that wires and
flat coils are not damaged while lifting the rear cover from
the set.
4.4.2
Speakers
Tweeters
Each tweeter unit is mounted with two screws.
When defective, replace the whole unit.
Subwoofer
The central subwoofer is located in the centre of the set and is
secured by two bosses.
When defective, replace the whole unit.
4.4.3
Mains Switch
The mains switch is mounted in the “leading edge” assy. Refer
to the exploded view in Chapter
4.4.4
Main Power Supply
Refer to
1
8
750_100_100414.ep
s
100414