5
Channel Installation
5.1
First Time to Install Channels
Install channels during the first TV installation
On the first TV installation, you can follow on-screen
instructions to set the menu language, network
connection, sign in Google account, select your
country and complete other basic settings for the TV.
Moreover, you can also install channels during the
first TV installation.
To install channels during the first TV installation…
1 -
The first TV installation starts from Welcome
screen with language setting options, follow on-
screen instruction to complete multiple TV settings
until the channel installation part.
2 -
The channel installation during the first TV
installation starts from
Satellite installation
, press
Start
if you want to install satellite channels. Press
Skip
to skip the satellite installation and go
to
Antenna
or
Cable
installation page.
3 -
Follow on-screen instructions to complete one of
the channel installation types as your selection. You
can install other types of channel installation later
on
MENU
>
TV options
>
Settings
>
Channel
.
For more details about
Satellite
,
Antenna
and
Cable
channel installation, please refer to respective
installation instruction sections.
5.2
Install Digital or Analogue
Channels
When scan and install channels, only current TV
source channels will be scanned. If you current TV
source is
DTV
, the channel scan applied to digital
channels. If you current TV source is
ATV
, the channel
scan applied to analogue channels.
To set or change TV source, press
SOURCES
and
select
DTV
or
ATV
.
5.3
Satellite
Satellite Installation
Please note that before installing channels, you
should first change the
Channel Installation Mode
to
the one you want to install. For the Satellite channel
installation, you need to change
Channel Installation
Mode
to
General Satellite
or
Preferred Satellite
first
and then start the installation.
To install Satellite channels…
1 -
Press
Home
>
Settings
>
Channel
>
Channel
Installation Mode
and press
OK
.
2 -
Select
General Satellite
or
Preferred Satellite
and
then go back to
Channel
.
3 -
Select
Channels
>
Satellite re-scan
or
Satellite
Manual Tuning
and press
OK
.
Alternatively, while watching a TV channel, you can
perform the channel scan by...
MENU
>
Navigation Keys
up >
Channels
>
Channel
Satellite Re-scan and Satellite
Manual Tuning
Scan channels with Satellite re-scan
To start Satellite re-scan…
1 -
Press
Home
>
Settings
>
Channel
>
Channel
Installation Mode
and press
OK
.
2 -
Select
General Satellite
or
Preferred Satellite
and
then go back to
Channel
.
3 -
Select
Channels
>
Satellite re-scan
and
press
OK
.
4 -
Select
Next
to proceed the scan or select
More
to find more scan types for different satellite systems.
Depending on your satellite system, there are 5 types
of Satellite scan modes to select.
•
Single
- Scan the channels from single satellite.
•
Tone Burst
- Scan the channels from up to 2
satellites.
•
DiSEqC 1.0
- Scan the channels from up to 4
satellites.
•
Unicable I
- Scan the channels from up to 2
satellites with up to 8 User Band Number.
•
Unicable II
- Scan the channels from up to 4
satellites with up to 32 User Band Number.
5 -
Select
Next
to start the scan immediately with
current satellite settings.
6 -
Select the
Satellite name
to view and change the
satellite settings. Once the satellite settings are
confirmed, press
Back
and select
Next
to start the
scan.
11