16
ENGLISH
ENGLISH
17
17
C
15
Replace the Razor Head Assembly back on
razor.
16
Put the protective razor head cap on the
razor to protect heads.
After Each Use: Trimmer (6955XL)
1
Turn razor to OFF (O) position.
C
2
Push trimmer slide switch up to pop up
trimmer.
C
3
Clean trimmer with the brush every time
you use it.
C
4
Lubricate the trimmer teeth with one drop
of mineral oil every 6 months.
5
Close trimmer by sliding trimmer switch
down.
This razor has no other user-serviceable parts.
For assistance call 1-800-243-3050.
C
7
Remove and clean one cutter and comb at
a time.
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
8
Separate the cutter from the comb.
C
9
Only brush the cutter in an upward motion.
Use the short bristled side of the brush.
C
10
Brush the slots of the comb.
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid
(e.g. Philips Norelco Shaving Head Cleaning Spray,
model HQ110 or alcohol). This helps prevent wear
of the shaving heads.
C
11
Replace the cutter and comb into the
Razor Head Assembly.
12
Repeat the process for the other two sets
of cutters and combs.
13
Replace the frame.
C
14
Turn the wheel clockwise until it locks into
place.
1
2
