To select the way how Ambilight switches off…
1 -
Press
, select
All Settings
and press
OK
.
2 -
Select
Ambilight
and press
(right) to enter
the menu.
3 -
Select
Advanced
>
TV Switch Off
and
press
OK
.
4 -
Select
Fade Out to Off
or
Immediate Switch
Off
.
5 -
Press
(left) repeatedly if necessary, to close
the menu.
ISF Tuning
When an ISF expert calibrates the TV, a static
Ambilight colour can be calibrated. You can select
any colour you want to calibrate. With the ISF
Calibration done, you can select the static ISF colour.
To select the ISF static colour…
Press
(Ambilight) and select
ISF
and press
OK
.
For more information, press the colour
key
Keywords
and look up
ISF® Calibration
.
Amb Hue
Configure
Step 1 - Network
In this first step, you will prepare the TV to find
the
Philips Hue Bridge
. The TV and the Philips Hue
Bridge must use the same network.
Setting up…
1 -
Connect the Philips Hue Bridge to the power
outlet.
2 -
Connect the Philips Hue Bridge to the same
router you are using for the TV — use an Ethernet
cable to connect.
3 -
Switch on the Hue bulbs.
To start the configuration…
1 -
Press
, select
All Settings
and press
OK
.
2 -
Select
Ambilight
>
Amhue
and
press
OK
.
3 -
Select
Configure
and press
OK
.
4 -
Select
Start
and press
OK
. The TV will search
for the Philips Hue Bridge. If the TV is not yet
connected to your network, the TV will start the
network setup first. If the Philips Hue Bridge appears
in the list …
go to Step 2 - Hue Bridge.
For more info on connecting the TV to your home
network, press the colour key
Keywords
and
look up
Network, wireless
.
Step 2 - Hue Bridge
In the next step, you will link up the TV with
the
Philips Hue Bridge
.
The TV can only be linked up to one Hue Bridge.
To link the Hue Bridge…
1 -
With the TV connected to your home network, it
will show the available Hue Bridges. If the TV did not
find your Hue Bridge yet, you can select
Scan
again
and press
OK
.
If the TV found the only Hue Bridge you have, select
the Hue Bridge name and press
OK
.
If you have more than one Hue Bridge available,
select the Hue Bridge you want to use and press
OK
.
2 -
Select
Start
and press
OK
.
3 -
Now go to the
Philips Hue Bridge
and press the
link button in the middle of the device. This will link
the Hue Bridge with the TV. Do this within 30
seconds. The TV will confirm if a Hue Bridge is now
linked to the TV.
4 -
Select
OK
and press
OK
.
With the Philips Hue bridge linked to the TV, go to
page
Hue bulbs
.
Step 3 - Hue Bulbs
In the next step, you will select the
Philips Hue
bulbs
that have to follow the Ambilight.
You can select a maximum of 9 Philips Hue bulbs for
Amhue.
To select the bulbs for Amhue…
1 -
In the list, mark the bulbs that have to follow the
Ambilight. To mark a bulb, select the bulb name and
press
OK
. When you mark a bulb, the bulb will blink
once.
2 -
When you’re done, select
OK
and press
OK
.
With the bulbs marked for Amhue, go to
page
Configure bulb
.
Step 4 - Configure Bulb
In the following step, you will configure each
Philips
Hue bulb
.
To configure each Hue bulb…
1 -
Select a bulb to configure and press
OK
. The
bulb you selected is flashing.
2 -
Select
Start
and press
OK
.
3 -
First indicate where you placed the bulb relative
to the TV. A correct setting of the
Angle
will send the
correct Ambilight colour to the bulb. Select the slider
bar to adjust the position.
4 -
Secondly, indicate the
Distance
between the
bulb and the TV. The further away from the TV, the
weaker the Ambilight colour. Select the slider bar to
71
