Audio Out - Optical
Audio Out - Optical is a high quality sound
connection. This optical connection can carry 5.1
audio channels. If your device, typically a Home
Theater System (HTS), has no HDMI ARC connection,
you can use this connection with the Audio In -
Optical connection on the HTS. The Audio Out -
Optical connection sends the sound from the TV to
the HTS.
You can set the type of the audio out signal to fit the
audio capabilities of your Home Theater System.
For more information, press
Keywords
and look
up
Audio Out settings
.
If the sound does not match the video on screen, you
can adjust the audio to video synchronization.
For more information, press
Keywords
and look
up
Audio to video sync
.
4.2
EasyLink HDMI CEC
EasyLink
With EasyLink you can operate a connected device
with the TV remote control. EasyLink uses HDMI CEC
(Consumer Electronics Control) to communicate with
the connected devices. Devices must support HDMI
CEC and must be connected with an HDMI
connection.
EasyLink setup
The TV comes with EasyLink turned on. Make sure
that all HDMI CEC settings are properly set up on the
connected EasyLink devices. EasyLink might not work
with devices from other brands.
HDMI CEC on other brands
The HDMI CEC functionality has different names on
different brands. Some examples are: Anynet, Aquos
Link, Bravia Theatre Sync, Kuro Link, Simplink and
Viera Link. Not all brands are fully compatible with
EasyLink.
Example HDMI CEC branding names are property of
their respective owners.
Operate devices
To operate a device connected to HDMI and set up
with EasyLink, select the device - or its activity - in
the list of TV connections. Press
SOURCES
, select
a device connected to an HDMI connection and press
OK
.
Once the device is selected, the TV remote control
can control the device. However
and
OPTIONS
keys and some other TV keys are not forwarded to
the device.
If the key you need is not on the TV remote control,
you can select the key in the Options menu.
Press
OPTIONS
and select
Controls
in the menu
bar. On the screen, select the device key you need
and press
OK
.
Some very specific device keys might not be available
in the Controls menu.
Note: Only devices that support
EasyLink remote
control
function will respond to the TV remote
control.
EasyLink settings
The TV comes with all EasyLink settings turned on.
You can turn off any EasyLink setting independently.
EasyLink
To turn off EasyLink completely . . .
1 -
Press
and select
Setup
and press
OK
.
2 -
Select
TV settings
>
General settings
>
EasyLink
.
3 -
Select
Off
and press
OK
.
4 -
Press
, repeatedly if necessary, to close the
menu.
EasyLink Remote Control
If you want devices to communicate but you don't
want to operate them with the TV remote control, you
can turn off EasyLink remote control separately.
In the EasyLink settings menu, select
EasyLink
Remote Control
and select
Off
.
Pixel Plus link
12
