Philips 50 T Series, Service Manual

Page: 15 / 105

Chapter 2 - Technical Specifications
Technical Specifications
Telemetry System (Receiver and Transmitter)
Power Requirements
The Telemetry System is set for the correct voltage at the factory, but before
you connect power, ensure that the voltage switch is in the correct position
for your country.
Operating Voltage: 100V - 120V~ or 220V - 240V (±10%).
Line Frequency: 50 to 60Hz.
Power Consumption: 19VA max.
Battery Type: 3 x 1.5V (AA size).
Environment
The Telemetry System should be used in an environment which is reasonably
free from vibration, dust, corrosive or explosive gases, extremes of
temperature and humidity. It operates within specifications at ambient
temperatures between 0 and 45°C . Ambient temperatures which exceed
these limits can affect the accuracy of the Telemetry System, the Transmitter
radio frequency transmission, and cause damage to the components and
circuits.
Operating Temp: 0 to +45°C (32°F to 113°F).
Storage Temp
1
: -40 to +75°C (-40°F to 167°F).
Relative Humidity: 5 to 95%.
Dimensions and Weight
Receiver
Height: 50mm (2in).
Width: 425mm (16.7in).
Depth: 392mm (15.4in).
Weight: 6.5kg (14.3 lb).
Transmitter
Height: 122mm (4.8 in).
Width: 85mm (3.3in).
Depth: 40mm (1.6in).
Weight: 200g (8 oz).
(without transducers and batteries).
1. Excludes transducers. Transducers can be stored at temperatures between -40°C
and +60°C (-40°F to +140°F).