5
Channels
5.1
Antenna/Cable Installation
Update Channels
Automatic Channel Update
If you receive digital channels, you can set the TV to
automatically update these channels.
Once a day, at 6 AM, the TV updates the channels
and stores new channels. New channels are stored in
the Channels List and are marked with a
.
Channels without a signal are removed. The TV must
be in standby to automatically update channels. You
can switch off Automatic Channel Update.
To switch off the automatic update…
1 -
Press
, select
All Settings
and press
OK
.
2 -
Select
Channels
>
Antenna/Cable Installation
.
3 -
Enter your PIN code if necessary.
4 -
Select
Automatic Channel Update
.
5 -
Select
Off
.
6 -
Press
(left) to go back one step or
press
BACK to close the menu.
When new channels are found or if channels are
updated or removed, a message is shown at TV start
up. To avoid this message to appear after every
channel update, you can switch it off.
To switch off the message…
1 -
Press
, select
All Settings
and press
OK
.
2 -
Select
Channels
>
Antenna/Cable Installation
.
3 -
Enter your PIN code if necessary.
4 -
Select
Channel Update Message
.
5 -
Select
Off
.
6 -
Press
(left) to go back one step or
press
BACK to close the menu.
In certain countries, the Automatic channel update is
done while watching TV or on any moment when the
TV is in standby.
Manual Channel Update
You can always start an channel update yourself.
To start a channel update manually…
1 -
Press
, select
All Settings
and press
OK
.
2 -
Select
Channels
>
Antenna/Cable Installation
.
3 -
Enter your PIN code if necessary.
4 -
Select
Search for Channels
.
5 -
Select
Start
.
6 -
Select
Update Digital Channels
, select
Next
.
7 -
Select
Start
to update the digital channels. This
can take a few minutes.
8 -
Press
(left) to go back one step or
press
BACK
to close the menu.
Reinstall All Channels
You can reinstall all channels and leave all other TV
settings untouched.
If a PIN code is set, you will need to enter this code
before you can reinstall channels.
To reinstall channels…
1 -
Press
, select
All Settings
and press
OK
.
2 -
Select
Channels
>
Antenna/Cable Installation
.
3 -
Enter your PIN code if necessary.
4 -
Select
Search for Channels
.
5 -
Select
Start
and press
OK.
6 -
Select
Reinstall Channels
, select
Next
and
press
OK
.
7 -
Select the country where you are now and
press
OK
.
8 -
Select
Next
and press
OK
.
9 -
Select the type of installation you want,
Antenna
(DVB-T)
or
Cable (DVB-C)
and press
OK
.
8 -
Select
Next
and press
OK
.
11 -
Select the type of channels you want,
Digital
and Analogue Channels
or
Only Digital
Channels
and press
OK
.
8 -
Select
Next
and press
OK
.
13 -
Select
Start
and press
OK
to update the
digital channels. This can take a few minutes.
14 -
Press
(left) to go back one step or
press
BACK to close the menu.
DVB-T or DVB-C
DVB-T or DVB-C Reception
During the channel installation, just before you search
for channels, you selected Antenna (DVB-T) or Cable
(DVB-C). Antenna DVB-T searches for terrestrial
analogue channels and digital DVB-T/T2 channels.
Cable DVB-C searches for analogue and digital
channels available from a cable DVB-C operator.
DVB-C Channel Installation
For ease of use, all DVB-C settings are set to
automatic.
If your DVB-C operator gave you specific DVB-C
values, the network ID or network frequency, enter
these values when the TV asks for them during
installation.
Channel Number Conflicts
In some countries, different TV channels
(broadcasters) might have the same channel number.
While installing, the TV shows the list with channel
12