3.3
Keyboard
Overview
Qwerty and Azerty
Overview of a Qwerty/Azerty keyboard.*
1
-
Azerty character
Character position if the keyboard layout is set to
Azerty.
2
-
Shift
To type uppercase characters.
3
-
Fn
key
To type a number or punctuation character.
4
-
Spacebar
5
-
Navigation
and
OK
6
-
Share this
To share online what you are watching at the
moment.
* Your remote control has a Qwerty / Azerty or a
Qwerty / Cyrillic keyboard, depending on your region.
Qwerty and Cyrillic
Overview of a Qwerty/Cyrillic keyboard.*
1
-
Cyrillic characters
Characters available when the keyboard is switched
to Cyrillic.
2
-
Cyrillic keyboard switch
To switch the keyboard to the Cyrillic characters or
back to Qwerty.
3
-
Shift
To type uppercase characters.
4
-
Fn
key
To type a number or punctuation character
5
-
Spacebar
6
-
Share this
To share online what you are watching at the
moment.
7
-
Navigation
and
OK
* Your remote control has a Qwerty/Azerty or a
Qwerty/Cyrillic keyboard, depending on your region.
Writing Text
With the keyboard on the back of the remote control,
you can write text in any text field on screen.
To write text…
1 -
Select a text field if it is not yet selected.
2 -
Turn the remote control keyboard facing upwards
to activate the keyboard keys. Hold the remote
control with two hands and type with both thumbs.
3 -
To hide the on screen keyboard, press
BACK
.
Press
OK
to confirm the text.
On-screen Keyboard
If you use the on-screen keyboard to enter text, you
can configure the keyboard layout to a layout you are
used to.
To open these settings…
Press
HOME
, select
All Settings
and press
OK
.
5 -
Select
Android Settings
and press
OK
.
6 -
Select
Preferences
>
Keyboard
and
press
OK
.
7 -
Select
Configure
>
Language
and press
OK
.
You can set your language keyboard layout here.
8 -
Press
BACK
to close the menu to go back
one step.
• Best distance to operate remote control with the TV
is less than 5 m.
• When using remote control keyboard, best to hold
the remote control with the angle less than 50
degree.
• Do not block the IR ray of the remote control.
3.4
IR Sensor
The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point
the remote control at the infrared sensor on the front
of the TV.
Warning
Do not put any objects in front of IR sensor of the TV,
it may block the IR signal.
3.5
Batteries
If the TV does not react on a key press on the remote
control, the batteries might be empty.
To replace the batteries, open the battery
compartment on the front-bottom of the remote
control.
1 -
Slide the battery door in the direction shown by
10
