Wall mounting instruction - Safety note
See supplied booklet.
Use the poster supplied as template to determine the location of the holes.
Use at least two outside holes. The distance between the two outside holes is
16”. Failing to do this may cause instability resulting in injury.
1. Wood stud installation
Drill holes into the centre of the wall studs.
Be certain to centre the two outside holes of the bracket over two
adjacent studs.
Attach the mounting plate using the two or three centre holes in the
plate.
2. Concrete wall installation
Drill the holes and secure the anchor bolts in accordance with the
instructions for HILTI anchor bolts. Place the mounting plate on the
anchor bolts. Place and tighten the washers and the nuts on the anchor
bolts.
Note: Do not insert the power plug in a wall socket before all connection are
made.
!
