Philips 40PFK6909, User Manual

Page: 73 / 98

Audio out offset
If you cannot set a delay on the Home Theatre System, you can
set a delay on the TV with
Audio out offset
.
For more information, press  Keywords and look up Audio
Out offset
.
Speakers
Home Theatre System
You can send the TV sound to a connected audio device - a
Home Theatre System or audio system.
You can select where you want to hear the TV sound and how
you want to control it.
• If you select Off , you permanently switch off the TV speakers.
• If you select TV speakers , the TV speakers are always on.
With an audio device connected with HDMI CEC, you can use
one of the EasyLink settings.
• If you select EasyLink , the TV sends the TV sound to the
audio device. The TV will switch off the TV speakers when the
device is playing the sound.
• If you select
EasyLink autostart , the TV will switch on the
audio device, send the TV sound to the device and switch off
the TV speakers.
With EasyLink or EasyLink autostart selected, you can still switch
to TV speakers if necessary.
To set the TV speakers . . .
1 - Press  and select Setup and press OK .
2 - Select TV settings > Sound > Sound output .
3 - Press  (right) and select Off , TV speakers , EasyLink or
EasyLink autostart .
4 - Press  , repeatedly if necessary, to close the menu.
To switch to speakers directly . . .
1 - While watching TV, press  .
2 - Select Speakers and select TV or Amplifier (audio system).
3 - Press  , repeatedly if necessary, to close the menu.
TV placement
As part of the first installation, this setting is set to either On a
TV stand or Wall mounted . If you have changed the placement
of the TV since then, adjust this setting accordingly for best
sound reproduction.
1 - Press  and select Setup and press OK .
2 - Select TV settings > General settings > TV placement and
press OK .
3 - Select On a TV stand or Wall mounted and press OK .
4 - Press  , repeatedly if necessary, to close the menu.
21.4
Ambilight
Ambilight style
Ambilight can have a preset mode or a static mode.
With preset mode, the TV follows the colours of the image on
screen.
With
Static , Ambilight has a constant static colour. You can
create an Ambilight static colour yourself.
First, select the Ambilight style you prefer.
To select an Ambilight style . . .
1 - Press  and select Setup and press OK .
2 - Select
TV settings
>
Ambilight
>
Ambilight style
.
3 - Select one of the preset style or Off .
4 - Press  , repeatedly if necessary, to close the menu.
To select a static colour . . .
1 - Press

and select
Setup
and press
OK
.
2 - Select TV settings > Ambilight > Ambilight
style > Static and press OK .
3 - Select the colour from the colour palette. Press OK to
confirm.
4 - Press  , repeatedly if necessary, to close the menu.
Ambilight settings
Ambilight brightness
With Ambilight Brightness , you can set the level of brightness of
the Ambilight.
To adjust the level . . .
1 - Press

and select Setup and press OK .
2 - Select TV settings > Ambilight > Brightness .
3 - Press OK and adjust the value with  (up) or  (down).
4 - Press  , repeatedly if necessary, to close the menu.
Ambilight saturation
With Ambilight Saturation , you can set the level of saturation of
the Ambilight.
To adjust the level . . .
1 - Press  and select Setup and press OK .
2 - Select TV settings > Ambilight > Saturation .
3 - Press OK and adjust the value with  (up) or  (down).
4 - Press  , repeatedly if necessary, to close the menu.
Amhue
73