Alignments
EN 146
BJ2.4U/BJ2.5U LA
8.
1.
Select a COLOUR TEMPERATURE (e.g. COOL,
NORMAL, or WARM).
2.
Set the RED, GREEN and BLUE default values according
to the values in the "Tint settings" table.
3.
When finished press STORE (in the SAM root menu) to
store the aligned values to the NVM.
4.
Restore the initial picture settings after the alignments.
Table 8-2 Tint settings (42”/50”)
Note:
These values were not available at the time of writing,
therefore they come from an early production sample (for
indication only). As soon as the production data become
available, a Service Info or Service Manual update will be
issued via the appropriate channels.
8.4
Option Settings
8.4.1
Introduction
The microprocessor communicates with a large number of I
2
C
ICs in the set. To ensure good communication and to make
digital diagnosis possible, the microprocessor has to know
which ICs to address. The presence / absence of these specific
ICs (or functions) is made known by the option codes.
Notes:
•
After changing the option(s), save them with the STORE
command.
•
The new option setting is only active after the TV is
switched "off" and "on" again with the Mains switch (the
NVM is then read again).
Default Values (37”/42”)
Cool
Normal
Warm
R
104/110
116/127
127/122
G
126/123
127/114
118/127
B
127/127
118/83
87/121