Philips 32PHS5301, User Manual

Page: 52 / 98

Sharpness settings
Super resolution
With Super Resolution , you switch on a superior
sharpness in line edges and contours.
To switch on or off…
1 - Press

.
2 - Select Picture and press

(right) to enter the
menu.
3 - Select Advanced > Sharpness > Super
Resolution , and press OK .
4 - Select On or Off .
5 - Press

(left) repeatedly if necessary, to close
the menu.
Noise reduction
With Noise reduction , you can filter out and reduce
the level of image noise.
To adjust the noise reduction…
1 - Press

, select Picture and press

(right) to
enter the menu.
2 - Select Advanced > Sharpness > Noise
reduction , and press

(right) to enter the menu.
3 - Select Maximum , Medium , Minimum or Off .
4 - Press

(left) repeatedly if necessary, to close
the menu.
MPEG artefact reduction
With MPEG artefact reduction , you can smoothen
the digital transitions in the picture. MPEG artefacts
are mostly visible as small blocks or jagged edges in
images.
To reduce the MPEG artefacts…
1 - Press

, select Picture and press

(right) to
enter the menu.
2 - Select Advanced > Sharpness > MPEG
artefact reduction , and press

(right) to enter the
menu.
3 - Select Maximum , Medium , Minimum or Off .
4 - Press

(left) repeatedly if necessary, to close
the menu.
Picture format
Fill the screen settings
If the picture is not filling the whole screen, if black
bars are showing on the top or bottom or at both
sides, you can adjust the picture to fill the screen
completely.
To select one of the basic settings to fill the screen…
1 - Press

, select Picture and press

(right) to
enter the menu.
2 - Select Picture format and press

(right).
3 - Select Fill screen, Fit to screen or Wide
screen , and press OK .
4 - Press

BACK to close the menu.
• Fill screen – automatically enlarges the picture to
fill the screen. Picture distortion is minimal, subtitles
remain visible. Not suitable for PC input. Some
extreme picture formats can still show black bars.
•
Fit to screen – automatically zooms in the picture
to fill the screen without distortion. Black bars may be
visible. Not suitable for PC input.
Advanced
If the two basic settings are inadequate to format the
picture you want, you can use the advanced settings.
With the advanced settings you manually format the
picture on your screen.
You can zoom, stretch and shift the picture until it
shows what you need – e.g. missing subtitles or
scrolling text banners . If you format the picture for a
specific Source – like a connected game console –
you can return to this setting the next time you use
the game console. The TV stores the last setting you
did for each connection.
To format the picture manually…
1 - Press

, select Picture and press

(right) to
enter the menu.
2 - Select Picture format and press

(right).
3 - Select Advanced and press OK.
4 - Use Last setting , Shift , Zoom , Stretch or
Original to adjust the picture. Select Undo to return
to the setting the picture had when you
opened
Picture Format .
• Last setting – Select to return to the last setting.
•
Shift – Select on the arrows to shift the picture. You
can only shift the picture when it is zoomed in.
•
Zoom – Select on the arrows to zoom in.
• Stretch – Select on the arrows to stretch the
picture vertically or horizontally.
•
Original – Shows the original format of the
incoming picture. This is a 1:1 pixel on pixel format.
Expert mode for HD and PC input.
•
Undo – Select to return to the picture format you
started with.
52