16
Multi room
16.1
About Multi room
This TV supports the Multi room client function. To
use the multi room function, you will need to have
another TV that support the Multi room server
function.
You can watch a TV programme that is streamed from
another server TV in your home. The programme is
streamed from the server TV to the client TV. You can
also receive a recorded programme from the server
TV.
Note
: Receiving a TV programme with Multi Room will
reduce the picture resolution to 720p maximum. You
cannot receive radio channels. Some broadcasters
may protect their programmes to prevent this kind of
streaming from the server TV.
16.2
What you need
To receive a TV programme from server TV, the
programme must come from a digital TV channel.
Both TVs must be connected to your wireless home
network. For more information,
press
Keywords
and look up
Wireless Network
.
Make sure that both TVs have the setting
Switch on
with Wi-Fi (WoWLAN)
switched on in the TV setup.
To check this setting on this TV…
1 -
Press
, select
Network and press
(right)
to enter the menu.
2 -
Select
Switch on with Wi-Fi (WoWLAN)
and
press
OK
.
3 -
Select
On
and press
OK
.
4 -
Press
(left) repeatedly if necessary, to close
the menu.
16.3
Using Multi room
First time use
When you start Multi room for the first time, switch on
both TVs.
Once this TV made a connection with the other TV,
the other one will appear automatically in
the
Browse network
menu even when it's in
standby.
Receive a TV channel
With Multi room, you can watch the current TV
channel or open the channel list of the server TV. If
you select a channel from the list, the other TV will
also switch to the channel you selected. If the server
TV has a build-in satellite tuner with installed
channels or a connected Hard Disc Drive (HDD) with
recordings*, you can also watch these on this TV. You
cannot switch channels while the server TV is
recording or in Pause TV mode.
To watch a TV channel from the server TV . . .
1
- Make sure the server TV is switched on.
2
- On this TV, press
SOURCES
,
select
Network
and press
OK
.
3
- If the TV is not yet connected to your home
network, the network installation will start
automatically. If the TV is already connected, go to
step 4.
4
- In the
Network
menu, select the name of the
server TV and press
OK
.
5
- Select what you want to watch from the TV . . .
• to watch the current channel of the server TV,
select
Current channel
and press
OK
.
• to open the channel list of the server TV,
select
Watch TV
and press
(Right).
• to open the satellite channel list of the server TV,
select
Watch satellite
and press
(Right).
• to open the list of recordings* on the server TV,
select
Watch recordings
and press
(Right).
• you can switch channels with
+
and
-
. You
cannot switch channels when the server TV
is recording or in Pause TV mode.
TV network name
If you have more than one TV in your home network,
you can give the TV a unique name.
To change the TV name…
1 -
Press
, select
Network
and press
(right)
to enter the menu.
2 -
Select
TV network name
and press
OK
.
3 -
Enter the name with the on-screen keyboard.
4 -
Select
Done
to confirm the change.
5 -
Press
(left) repeatedly if necessary, to close
the menu.
48
Summary of Contents for 32PHS5301
Page 97: ...YPbPr connection tips 12 97 ...
