44
There is a picture but the sound quality is
poor:
•
Check that the sound settings are
correctly set.
There is a picture but sound comes from one
speaker only:
•
Verify that sound balance is set to the
centre.
HDMI connection issues
There are problems with HDMI devices:
•
Note that HDCP (High-bandwidth Digital
Content Protection) support can delay
the time taken for a TV to display content
from a HDMI device.
•
If the TV does not recognize the HDMI
device and no picture is displayed, try
switching the source from one device to
another and back again.
•
If there are intermittent sound
disruptions, check that output settings
from the HDMI device are correct.
•
If you use an HDMI-to-DVI adapter
or HDMI-to-DVI cable, check that an
additional audio cable is connected to
AUDIO
(mini-jack only).
Computer connection issues
The computer display on the TV is not
stable:
•
Check that your PC uses the supported
resolution and refresh rate.
•
Set the TV picture format to unscaled.
There is poor picture quality from connected
devices:
•
Check that the devices are connected
properly.
•
Check that the picture settings are
correctly set.
The TV did not save your picture settings:
•
Check that the TV location is set to the
home setting. This mode offers you the
flexibility to change and save settings.
The picture does not fit the screen; it is too
big or too small:
•
Try using a different picture format.
The picture position is incorrect:
•
Picture signals from some devices may
not fit the screen correctly. Check the
signal output of the device.
Cannot remove ‘e-sticker’ banner displayed
on the TV.
•
To remove the logos and images, set the
location of your TV to home.
1. Press
MENU
.
2. Select
[Setup]
>
[Installation]
>
[Preferences]
>
[Location]
.
3. Select
[Home]
and press
OK
.
Sound issues
There is a picture but sound quality is poor:
Note
•
If no audio signal is detected, the TV automatically
switches the audio output off — this does not
indicate malfunction.
•
Check that all cables are properly
connected.
•
Check that the volume is not set to 0.
•
Check that the sound is not muted.
EN
Summary of Contents for 32PFL3406H
Page 2: ......