38
Use a Conditional Access
Module
A Conditional Access Module (CAM) is
provided by digital TV service operators to
decode digital TV channels.
Note
•
Refer to the documentation from your service
operator on how to insert a smart card into the
Conditional Access Module.
Insert and activate a CAM
Caution
•
Be sure to follow the instructions described below.
Wrong insertion of a CAM may damage both the
CAM and your TV.
1
Switch off the TV and disconnect it from
the power outlet.
2
Following the directions printed on the
CAM, gently insert the CAM into the
COMMON INTERFACE
at the side of
the TV.
3
Push the CAM in as far as it will go.
4
Reconnect the TV to the power outlet.
5
Turn on the TV and wait for the CAM
to be activated. This may take several
minutes. Do not remove the CAM from
the slot when in use — removing the
CAM will deactivate digital services.
•
HDMI cable and HDMI-DVI adaptor
•
VGA cable
DVI
PC AUDIO IN/ PC IN(AUDIO)
VGA
PC AUDIO IN/ PC IN(AUDIO)
VG
A
EN
Summary of Contents for 32PFL3406H
Page 2: ......