56
9.
Feature settings
[Multi RC]
This function allows that up to ten televisions can be installed in a room whereas every TV will listen to its own RC.
Once the TV is set, also every RC can be set to remember its connected TV:
[Off]
This function is not used; all TVs will
listen to a ‘blue’ R
C.
[TV0]
The TV will listen to a ‘0’ RC. Press a
nd hold both the menu and number
“
0
”
button on the RC for about five seconds.
[TV1]
The TV will listen to a ‘1’ RC.
Press and hold both the menu and number
“
1
”
button on the RC for about five seconds.
[TV2]
The TV will listen to a ‘2’ RC. Press and hold both the menu and
number
“
2
”
button on the RC for about five seconds.
[TV3]
The TV will listen to a ‘3’ RC. Press and hold both the menu and number “
3
”
button on the RC for about five seconds.
[TV4]
The TV will listen to a ‘4’ RC. Press and hold both the menu and number “
4
”
button on the RC for about five seconds.
[TV5]
The TV will listen to a ‘5’ RC. Press and hold both the menu and number “
5
”
button on the RC for about five seconds.
[TV6]
The TV wi
ll listen to a ‘6’ RC. Press and hold both the menu and number “
6
”
button on the RC for about five seconds.
[TV7]
The TV will listen to a ‘7’ RC. Press and hold both the menu and number “
7
”
button on the RC for about five seconds.
[TV8]
The TV will listen
to a ‘8’ RC. Press and hold both the menu and number “
8
”
button on the RC for about five seconds.
[TV9]
The TV will listen to a ‘9’ RC. Press and hold both the menu and number “
9
”
button on the RC for about five seconds.
Press and hold the OK button for about five seconds to check the current color of the Multi Remote settings of TV
and user remote.
[MyChoice]
In this manual we will cover only the configuration of MyChoice on the TV, all details about the account and credits
are covered in a different manual. Please contact your TP Vision country sales manager to setup an account and buy
the credits.
During the installation of the TV sets please collect the following information:
Room number
TV model
Serial number
101
32HFL5009D/10
FZ1A
Room number, TV model and serial number are required on MyChoice website when rooms are configured. Make
sure that all values are correct because the MyChoice website is generating pin codes based on this information. You
can gather all these details during the installation and afterwards enter them in the administration part of the
MyChoice website.
How to configure the MyChoice is described below:
1.
The most important step for MyChoice is the clock. If the clock is not defined or the T
V doesn’t
have the
correct time, MyChoice will display the following message:
MyChoice is not available, please contact the
reception.
Enter the Professional menu go to:
Clock setup
and configure the Download program.
