Philips 24phk5210, User Manual

Page: 8 / 59

EasyLink settings
The TV comes with all EasyLink settings switched on.
You can switch off any EasyLink setting
independently.
EasyLink
To switch off EasyLink completely . . .
1. Press

and select Setup and press OK .
2. Select TV settings > General
settings > EasyLink .
3. Select EasyLink .
4. Select Off and press OK .
5. Press

, repeatedly if necessary, to close the
menu.
EasyLink Remote Control
If you want devices to communicate but you don't
want to operate them with the TV remote control, you
can switch off EasyLink remote control separately.
You can control multiple HDMI-CEC compliant
devices with your TV remote control.
In the EasyLink settings menu, select EasyLink
Remote Control and select Off .
One-touch play
When you play an HDMI-CEC compliant device, the
TV switches on from standby and switches to the
correct source.
One-touch standby
When you press

on the TV remote control, the TV
and all HDMI-CEC compliant devices switch to
standby mode.
System audio control
If you connect an HDMI-CEC compliant device that
includes speakers through the HDMI ARC connector,
you can choose to hear the TV audio from those
speakers instead of the TV speakers.
3.3
Common interface - CAM
CI+
This TV is ready for the CI+ Conditional Access.
With CI+ you can watch premium HD programmes,
like movies and sports, offered by digital TV
broadcasters in your region. These programmes are
scrambled by the TV broadcaster and descrambled
with a prepaid CI+ module.
Digital TV broadcasters provide this CI+ module
(Conditional Access Module - CAM) when you
subscribe to their premium programmes. These
programmes have a high level of copy protection.
Contact a digital TV broadcaster for more information
on terms and conditions.
CAM
Insert a CAM module
Switch off the TV before inserting a CAM.
Look on the CAM for the correct method of insertion.
Incorrect insertion can damage the CAM and TV.
Use the Common Interface slot on the TV to insert the
CAM card.
With the front of the card facing to you, gently insert
the CAM as far as it will go.
Leave the card in the slot permanently.
It may take a few minutes before the CAM is
activated. Removing the CAM will deactivate the
broadcast service on TV.
If a CAM is inserted and subscription fees are paid,
(connection methods can differ), you can watch the
TV broadcast. The inserted CAM is exclusively for
your TV.
3.4
Set-top box - STB
Use 2 antenna cables to connect the antenna to the
Set-top box (a digital receiver) and the TV.
Next to the antenna connections, add an HDMI cable
to connect the Set-top box to the TV.
Alternatively, you can use a SCART cable if the Set-
top box has no HDMI connection.
Auto switch off
8