CAM PIN
(Home) > Settings > Child lock > CAM PIN
Set CAM PIN for recording.
Antenna/cable installlation
Update existing channel list
(Home)
>
Settings
>
Antenna/cable
installlation
>
Search for channels
>
Update
channels
Re-install all channels
(Home)
>
Settings
>
Antenna/cable
installlation
>
Search for channels
>
Re-install
channels
1. Select the country where you are now and
press
OK
.
2. Select
Antenna
(DVB-T)
or
Cable (DVB-C)
, and
select one item you need to re-install.
3. Select
Digital and analogue channels
,
Only digital
channels
, or
Only analogue channels
.
4. Select
Start
and press
OK
to update channels.
This can take a few minutes.
(Home)
>
Settings
>
Antenna/cable
installlation
> Automatic channel update
If you receive digital channels, you can set the TV to
automatically update the list with new channels.
Alternatively, you can start a channel update yourself.
Automatic channel update
Once a day, at 6 AM, the TV updates the channels
and stores new channels. New channels are stored in
the All channels list but also in the New channels list.
Empty channels are removed.
If new channels are found or if channels are updated
or removed, a message is shown at TV start up. The
TV must be in standby to automatically update
channels.
(Home)
>
Settings
>
Antenna/cable
installlation
>
Channel update message
When new channels are found or if channels are
updated or removed, a message is shown at TV start
up. To avoid this message to appear after every
channel update, you can switch it off.
Update Software
Search for Updates
(Home) >
Settings
>
Update
software
>
Search for updates
.
You need a computer and a USB memory device to
upload the software on the TV. Use a USB memory
device with 256MB free space. Make sure that write
protection is switched off.
1. Start the update on TV
-
(Home) >
Settings
>
Update
software
>
Search for updates
.
2. Identify the TV
- Insert the USB memory into one of the USB
connections of the TV.
Select
Start
and press
OK
. An identification file is
written on the USB memory device.
3. Download the TV software
- Insert the USB memory into your computer.
- On the USB memory device, locate the
file
update.htm
and double click it.
- Click on
Send ID
.
- Select your region
- If new software is available, download the .zip file.
After the download, unzip the file and copy the
file
autorun.upg
onto the USB memory device.
4. Update the TV software
- Insert the USB memory into the TV again. The
update starts automatically.
The TV switches itself off for 10 seconds and then
back on again. Please wait.
Do not . . .
- remove the USB memory device from the TV
If a power cut occurs during the update, never
remove the USB memory device from the TV. When
the power returns, the update will continue.
32
