Philips 243B1, User Manual

Page: 19 / 35

17
6. Daisy-chain function
6. Daisy-chain function
DisplayPort Multi-Stream feature
enables multiple monitor connections.
This Philips display is equipped with
DisplayPort interface and DisplayPort
over USB-C which enables daisy-
chaining to multiple displays.
Now you can daisy chain and use
multiple monitors via a single cable
from one display to the next.
To daisy-chain monitors, first to check
below:
1. Make sure the GPU on your PC
support DisplayPort 1.2 MST (Multi-
stream transport).
2. Turn off Adaptive Sync function:
press button, select Picture >
Adaptive Sync > Off. (For selected
model)
Note
Depending on the capabilities of your
graphic cards, you should be able
to daisy chain multiple displays with
various configurations. Your display
configurations will depend on your
graphic card capabilities. Please check
with your graphic card vendor and
always update your graphic card driver..
DisplayPort multi-streaming over
DisplayPort
DP
DP
DP
PC
DP OUT
Display Resolution Maximum number of external
monitors that can be supported
Extend mode (DisplayPort)
1920 x 1080 @ 60Hz 3
DisplayPort multi-streaming over USB
Type-C
USB C USB C
USB C
DP
PC
DP OUT
Display
Resolution USB Settings Maximum number of
external monitors that can
be supported
Extend mode (USB-C)
1920 x 1080
@60Hz
USB 2.0 3
USB 3.2 1
Note
We recommend to set USB Setting to
USB 3.2, please enter OSD menu and
select USB3.2 which supports the LAN
speed to 1G.
To select one of DP Out Multi-stream
modes:
Press button, select Setup > DP Out
Multi-stream > Extend
.

 

 
  

 




