3
•
Please install and connect the product in the order as described in this manual
only.
•
Please read this guide carefully before using the Streamium LCD TV and keep it for
future reference.
•
The most recent downloads and information on this product will be available through
our website www.philips.com/streamium.
•
Broadband Internet access (min. 256 kbps) is required if you want to use the Internet
functions of the Streamium LCD TV.
•
Please check whether your Internet service provider charges extra fees for exceeding
a certain limit of transferred data.
When using Internet media services on a daily basis, you may exceed such a limit.
For example: When you listen to Internet radio (at 64 kbps) for about 36 hours, 1 GB
(gigabyte) of data will be transferred to your streamium system. Watching Internet video at
700 kbps exceeds a 1 GB limit in 3 hours.
•
During set-up and installation, it may be helpful to have the instructions for your TV set,
audio system and wireless base station or other wireless network components (if
appropriate) at hand.
Safety Precautions
•
NEVER MAKE OR CHANGE CONNECTIONS WITH THE POWER SWITCHED ON.
•
Before operating the system, check that the operating voltage indicated on the nameplate
(or the voltage indication beside the voltage selector) of your system is identical with
the voltage of your local power supply. If not, please consult your dealer.
•
Radio equipment for wireless applications is not protected against disturbance from
other radio services.
•
The product should not be exposed to dripping or splashing.
No object filled with liquids, such as vases, should be placed on the product.
•
Do not expose the system to excessive moisture, rain, sand or heat sources caused by
heating equipment or direct sunlight.
•
Allow a sufficient amount of free space all around the Streamium LCD TV for adequate
ventilation.
•
Do not attempt to repair the product yourself if you experience technical difficulties.
Contact your Philips retailer.
•
Place the system on a flat, hard and stable surface. When the system is switched to
standby mode, it is still consuming some power. To disconnect the system from the
power supply completely, remove the AC power plug from the wall socket.
•
Make sure the air around the Streamium LCD TV can circulate to prevent the set from
overheating internally. Also, avoid putting any heat sources (e.g. a power amplifier)
underneath. The Streamium TV has a thermal shutdown that shuts down the set when
the internal temperature exceeds a certain threshold. If this happens, the set switches
to standby with the Power-LED flashing on and off. To remedy this situation: disconnect
the mains, let the set cool down, improve ventilation, and reconnect the set to the
mains.
Important information
23iF9946_12_StDFU_ENG.p65
8/31/04, 4:30 PM
3
