Philips 200WP7EB/00, Service Manual

Page: 17 / 97

17
Step 4: Pull out the foot from base as Fig 5 Fig.6.
200WP7 LCD
Mechanical Instructions
Go to cover page
1.Back view as Fig.1
Fig.1
3. Remove cable base as Fig7 and Fig.8
Fig.2
Fig.3
Fig.4
4.Remove back cover as Fig.9 and Fig.10
Fig.5
Fig.6
Fig.7
5.Remove the shielding
Unscrew the screws
Unscrew the 2 screws and open the clicks on the sides
-Unscrew the screws and then pull down the shielding as Fig.11 Fig.12
Fig.8
Fig.9
Fig.10
2.remove the base
-
Step 1: Place the monitor face down on a smooth surface as Fig 2.
Be carefully to prevent the scratch and injury during the uninstallation.
Step 2: Unfasten one screw on the base stand as Fig 3.
Step 3: Firmly insert the base removal tool into four-pronged clicks as Fig 4
Base Column Base stand Base Column Base stand
Fig.12
http://www.wjel.net