Philips 200P4VG/00, Service Manual

Page: 8 / 77

Uh3 200P4 8
Attention Signals
Go to cover page
Attention
Signals
Display Time Condition
CANNOT
DISPLAY
THIS VIDEO
MODE,
CHANGE
COMPUTER
DISPLAY
INPUT TO
1600x1200 @
60HZ
30 mins This warning appears when the
input signal from the computer
is not in a standard video mode
or is out of the monitor's
scanning range. After 30 mins,
monitor enters sleeping mode.
CANNOT
DISPLAY
THIS VIDEO
MODE
30 mins This warning appears when the
VEDIO input signal is not in a
standard video mode or is out of
the monitor's scanning range.
After 30 mins, monitor enters
sleeping mode.
NO VIDEO
INPUT
30 mins This message appears when
there is no signal input while
power on, or interface cable
disconnected, or while power
off. After 30 mins, monitor
enters sleeping mode.
ENTERING
SLEEP MODE
3 secs This message appears when
monitor is about to enter power
saving mode.
WAITING
FOR
AUTOMATIC
ADJUSTMEN
T
Till auto
adjustment
finished
This message is displayed
when the auto adjustment
button is pressed. It disappears
when automatic adjustments
are completed.
USE 1600 X
1200 FOR
BEST
RESULT
On top of
OSD
main menu
without
flashing.
The message will show up and
still at the top of the OSD main
controls in red color when the
input resolution is not the
1600x1200.
OSD MAIN
CONTROLS
LOCKED
3 secs / or till
"OSD MAIN
CONTROLS
UNLOCKED"
appear
This message will appear for 3
seconds to indicate the OSD
MAIN CONTROLS locked or un -
lock it by pressing "OK (MENU)"
button for more than 10
seconds while there is video
input from PC.
OSD MAIN
CONTROLS
UNLOCKED
3 secs This message will appear for 3
seconds to indicate the OSD
MAIN CONTROLS un-locked by
pressing "OK (MENU)" button
for more than 10 seconds while
there is video input from PC.
The window of
"OSD MAIN
CONTROLS"
60 secs This message will appear when
the "OK" button is pressed.
the window of
"BRIGHTNES
S"
60 secs This message will appear when
the BRIGHTNESS hot key is
pressed while monitor is not in
OSD operation.
the window of
"VOLUME"
60 secs This message will appear when
the VOLUME hot
key is pressed while monitor i s
not in OSD operation.
ANALOG (D-
SUB) INUT
1). Disappear
on 2nd
pressing of
Input selection
hot key 2). 3
secs
* First pressing on Input
selection hot key while PC VGA
signal displays on screen. The
attention signal is showing the
current display signa l mode.
* PC VGA signal is selected by
1. Auto detecting while power
on 2. Input selection switching
from other sources
DIGITAL (DVI)
INPUT
1). Disappear
on 2nd
pressing of
Input selection
hot key 2). 3
secs
* First pressing on Input
selection hot key while PC DVI-
D signal displays on screen.
The attention signal is showing
the current display signal mode.
* PC DVI-D signal is selected by
1.Auto detecting while power on
2.Input selection switching from
other sources
S-VIDEO
INPUT
1). Disappear
on 2nd
pressing of
Input selection
hot key 2). 3
secs
* First pressing on Input
selection hot key while SVIDEO
signal displays on screen. The
attention signal is showing the
current display signal mode.
* S-VIDEO signal is selected by
1.Auto detecting while poweron
2.Input selection switching from
other sources
CVBS
INPUT
1). Disappear
on 2nd
pressing of
Input selection
hot key 2). 3
secs
* First pressing on Input
selection hot key while CVBS
signal displays on screen. The
attention signal is showing the
current display signal mode.
* CVBS signal is selected by
1.Auto detecting while power on
2.Input selection switching from
other sources
ANALOG (D-
SUB) INPUT
NOT
AVAILABLE
1). 3secs
2). Disappear
when next
signal
has been
detected while
power on
* PC VGA signal is not available
while signal
input selection.
* PC VGA signal is not available
on signal auto
detection while power on.
DIGITAL (DVI)
INPUT NOT
AVAILABLE
1). 3secs
2). Disappear
when next
signal
has been
detected while
power on
* PC DVI-DL signal is not
available while signal
input selection.
* PC DVI-D signal is not
available on signal auto
detection while power on.
S-VIDEO
INPUT NOT
AVAILABLE
1). 3secs
2).Disappear
when next
signal has
been detected
when power
on
* S-VIDEO signal is not
available while signal
input selection.
* S-VIDEO signal is not
available on signal auto
detection while power on.
CVBS
INPUT NOT
AVAILABLE
1). 3secs
2).Disappear
when next
signal has
been detected
while power
on
* CVBS signal is not available
while signalinput
selection.
* CVBS signal is not available
on signal auto
detection while power on.
SEARCHING
SIGNALS
Disappear
when signal
detected
While signal input detection
http://www.wjel.net