Philips 107S7, Service Manual

Page: 14 / 87

17” CDT Color Monitor 107S7
14
EU
EHT Current B-Gain
BP
B Plus R-Gain
BB
Bottom Balance Brightness
TB
Top Balance Contrast
HB
HS Wave Balance V-Moire Reduce
HS
HSWAVE H-Moire Reduce
TM
User Timr:00273hours PIN-Balance
65
Save 6500C color Parallelogram
93
Save 9300C color Trapezoid
VF
V-Focus Pincushion
VB
VLIN Balance Rotation
VI
V Linearity V- Center
HL
H Linearity V-size
BC
Bottom Corner H-Center
TC
TOP Corner H -size
D. To switches the input signal to the other Timing Mode. Please follow step A ~ C to get the optimum picture.
E. Select the " " RETURN function and press the MENU Key, then the Factor Preset window will be
returned to the original OSD window.(user's operating condition)
F. The setting data of the CONTRAST, BRIGHTNESS, COLOR TEMPERATURE are common mode saved
in the memory. Don't needed adjust it individual at every timing Mode and save in the memory.
3. White Balance, Luminance adjustment:
A. Press MENU Key to show OSD menu ,and press the down Key to select the "zoom" function, then press
the menu Key to enter second menu, press the down key to select “ “above 10S,then enter into factory
setting area for modulation.
B. Brightness & contrast ratio MAX.
C. Raster Max modulation: Raster Pattern, adjust R or B bias and G2, make x=270
±
10, y=290
±
10, Y=2.0±0.2
cd/m
2
D. Raster cut off modulation: Raster Pattern, adjust brightness to make Cut off: 0.08±0.02 cd/m
2
,and then put
9300K & 6500K into it.
E.Small white screen appears, Raster cut off, make SB to select 4
(1).Choose 4 for LH ,set R or G or B gain, make x=283
±
15, y=297
±
15
，
Y=350
±
15 cd/m
2
,then save it into
9300K color temperature, set R or G or B gain, make x=313
±
15, y=329
±
15,Y=300
±
15, then save it into
6500K color temperature, then exit the factory setting area.
(2). Choose 3 for LH,set R or G or B gain, make x=283
±
15, y=297
±
15 ， Y=270
±
15,then save it into 9300K
color temperature; set R or G or B gain, make x=313
±
15, y=329
±
15,Y=250
±
15,then save it into 6500K color
temperature, then exit the factory setting area.
(3). Choose 2 for LH,set R or G or B gain, make x=283
±
15, y=297
±
15
，
Y=210
±
15,then save it into 9300K
color temperature, set R or G or B gain, make x=313
±
15, y=329
±
15,Y=200
±
15,then save it into 6500K color
temperature, then exit the factory setting area.