Philips 107S2 CM2300 Service Manual Download

Page: 9 / 41

107S2 CM23 GSIII

OSD Adjustments

Smart Help

After returning to MAIN CONTROLS . . .

...to continue to ADJUST SIDE ANGLES, start with step 5 under

ADJUST SIDE ANGLES and follow the directions.
...to exit completely, press the button twice.
...to adjust only the BALANCED pincushion, follow steps 1 - 4 above,

then press the button, and follow steps 7 - 9.
...to adjust only the PARALLELOGRAM, follow steps 1 - 4 above, then

press the button, and follow steps 7 -9
ADJUST SIDE ANGLES
ADJUST SIDE ANGLES under ADJUST SHAPE allows you to adjust

two of the five preset options. These two options are TRAPEZOID and

PARALLELOGRAM. Note: use these features only when the picture is

not square.
1) Press the button on the monitor. The MAIN CONTROLS window

appears.
2) Press the button until ADJUST SHAPE is highlighted.

3) Press the button. The ADJUST SHAPE window appears. ADJUST

SIDE CURVE should be highlighted.

4) Press the button to highlight ADJUST SIDE ANGLES.
5) Press the button. The SIDE ANGLES window appears.

TRAPEZOID should be highlighted.

6) To adjust the trapezoid, press the or button.
SHAPE window.

7) When the trapezoid is adjusted, press the button to highlight

PARALLELOGRAM or press the button to return to the ADJUST

8) To adjust the parallelogram, press the or button.
9) When the parallelogram is adjusted, press the button to return to

the ADJUST SHAPE window. BACK TO MAIN WINDOWS will be

highlighted.
10) Press the button to return to the MAIN CONTROLS window, or

press the button until ROTATE IMAGE is highlighted.

After returning to MAIN CONTROLS . . .

...to continue to ROTATE IMAGE, start with step 5 under ROTATE

IMAGE and follow the directions.
...to exit completely, press the button twice.
...to adjust only the PARALLELOGRAM, follow steps 1 - 4 above, then

press the button, and follow steps 7 -9
ROTATE IMAGE (Not available in all models)
ROTATE IMAGE under ADJUST SHAPE allows you to adjust one of

the five preset options. These two options are PINCUSHION and

BALANCED pincushion. Note: use this feature only when the picture is

not square.
1) Press the button on the monitor. The MAIN CONTROLS window

appears.
2) Press the button until ADJUST SHAPE is highlighted.

3) Press the button. The ADJUST SHAPE window appears. ADJUST

SIDE CURVE should be highlighted.
4) Press the arrow until ROTATE IMAGE is highlighted.

Smart Help

Go to cover page

Forward

Back

http://jdwxzlw.5d6d.com/?fromuser=华盛维修

家电维修资料网，免费下载各种维修资料

Summary of Contents for 107S2 CM2300










































Search results

Summary of Contents for 107S2 CM2300

Reviews:

Related manuals for 107S2 CM2300

Brands by name

Popular brands

Philips 107S2 CM2300, Service Manual

Search results

Summary of Contents for 107S2 CM2300

Reviews:

Related manuals for 107S2 CM2300

Brands by name

Popular brands