Philips 107E Page 98 User Manual Download

Page: 98 / 110

The OSD Controls

confirm. Press

button to adjust the color red.

6b) When finished with RED, press

to confirm. Press the

button to highlight GREEN.

press

to confirm.Next, press the

button to adjust the color green.

6c) When finished GREEN, press

to confirm.Then, press

button to highlight BLUE.Press

to confirm. Next, press the

button to adjust the color blue.

6d) When all adjustments are complete, press the

button to confirm your adjustments and

return to the MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.

RETURN TO TOP OF THE PAGE

RESET TO FACTORY SETTINGS

RESET TO FACTORY SETTINGS returns everything in all the windows to factory presets.

1) Press the

button on the monitor. The MAIN CONTROLS window appears.

2) Press the

button until RESET TO FACTORY SETTINGS is highlighted.

file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (18 of 24)2005-04-08 ¤W¤È 11:23:01

Summary of Contents for 107E















































































































Search results

Summary of Contents for 107E

Reviews:

Related manuals for 107E

Brands by name

Popular brands

Philips 107E, User Manual

Search results

Summary of Contents for 107E

Reviews:

Related manuals for 107E

Brands by name

Popular brands