Door/Window Sensor PSM08
The door/window sensor PSM08 has door/window sensor function,
based on Z-Wave
TM
technology.
This device is a Security Enabled Z-Wave Plus Product. Z-Wave
TM
is a
wireless communication protocol designed for home automation,
specifically to remotely control applications in residential and light
commercial environments. The technology uses a low-power RF radio
embedded or retrofitted into home electronics devices and systems,
such as lighting, home access control, entertainment systems and
household appliances.
This product can be included and operated in any Z-Wave
TM
network
with other Z-Wave
TM
certified devices from other manufacturers and/or
other applications. All non-battery operated nodes within the network
will act as repeaters regardless of vendor to increase reliability of the
network.
The device adopt the Z-Wave
TM
500 series chip, when your Z-Wave
TM
network system is all made by Z-Wave
TM
500 series devices. The
network system will have the advantages as below.
•
Concurrent multi-channel support reduces external interference.
•
Better RF range, improve about 10 meters in indoor.
•
Support 100 Kbps transmit speed, speed up communication.
Specification
Power
3VDC (CR123A lithium battery)
RF distance
Min. 40M indoor,
100M outdoor line of sight,
RF Frequency
868.40 MHz, 869.85 MHz(EU)
908.40 MHz, 916.00 MHz(US)
920.9MHz, 921.7MHz, 923.1MHz
(TW/KR/Thai/SG)
RF Maximum Power
+5dBm
Location
indoor use only
Operation temperature
-10
o
C to 40
o
C
Humidity
85%RH max
FCC ID
RHHPSM08
Specifications are subject to change and improvement without
notice.
Troubleshooting
Symptom
Cause of Failure
Recommendation
The device can not
join to Z-Wave™
network
The device may in
a Z-Wave™
network.
Exclude the device then
include again.
1
