1
Free-to-Air Digital Satellite Kit
SET-UP GUIDE
28211R
List of Dish Assembly Parts -
for the rest of kit contents see page 4
1) Identify your South Facing Wall:
The dish needs to
be on a South facing wall in order to pick up the
Astra 2A, 2B, 2D and Eurobird1 satellites. Identify your
south facing wall and look to mount your satellite dish
on the outside of the wall, at the nearest point to your
main TV. Tip: Look at your neighbours’ houses someone is sure to have Sky, see which
way their dish is facing. If none of your neighbours have Sky, you can use
a compass to determine which wall faces south.
Please note
that the
mounting
bracket can
be mounted
on either a wall or a flat roof.
2) Check line of sight:
Make sure
there are no obstructions (trees/tall
buildings) in line between the dish
and the satellites. The following
website gives bearing/direction by postcode, country:
http://www.dishpointer.com
3) Assemble the Dish and Brackets:
Before assembly check that your kit contains all the items listed above. Assemble the dish and brackets
as shown in the diagram but do not yet attach to the wall mount arm (18).
LNB
Wall Mount Roof Mount
Every satellite dish installation is different
in nature. To fit suitable brackets, fixings
and poles/masts you need to take into consideration: a.) The state
and type of surface being mounted to. b.) The weight of the
assembly to be mounted c.) The exposure to and effect of
prevailing winds.
Fixings and brackets supplied with this product
may not be suitable for your particular installation
.
If in doubt please
consult a CAI registered installer.
WARNING
GENERAL SAFETY
The risk of accidents can be greatly
reduced by planning before starting a project.
Before starting
installation check structure is sound and check for hidden
electrical wiring or plumbing. • When working on an installation
outside, beware of overhead power lines. • Before making any
connections switch electricity off at the mains. • Always follow
manufacturer’s operating and safety instructions when using
tools and equipment. • Only carry out work outdoors at height if
you are competent in the use of ladders and related access
equipment. • Always read and follow the manufacturer’s
instruction label affixed to the ladder. • To avoid injury always
route cables or wiring carefully. Ensure cable is correctly
routed before fixing into position, taking care not to over
tighten cable clips . • This product may contain small parts
keep out of reach of children. • After installation make regular
maintenance checks for wear and tear.
This Free-to-Air Installation Kit, can be fitted by a
competent DIYer, but please note warnings below.
No.
Image
Description
Qty.
1
M6 x 20mm bolts for LNB holder
2
2
M6 x 12mm bolts for swivel
bracket/LNB holder
5
3
PVC LNB arm inserts
2
4
M6 x 30mm bolts for LNB arm
2
5
M6 x 16mm bolts for dish fixing
4
6
M6 flange nuts for dish bracket
4
7
Washers
9
8
M6 x 55mm bolts for mast clamp
2
9
M6 x 50mm expansion bolts
4
10
PVC cap for wall mount arm
1
11
Satellite dish
1
12
dish bracket
1
13
LNB arm
1
14
Mast bracket
1
15
Mast clamp
1
16
Upper part 40mm LNB holder
1
17
Lower part 40mm LNB holder
1
18
Wall mount arm Ø32mm
1
19
M6 nuts for LNB holder
2
