Philco TeraDRY 12, Instruction Manual

Page: 33 / 36

TROUBLE SHOOTING
2.
FUNCTIONING TEMP.
5° C ≤ Ambient Temp. ≤ 35 °C
When the ambient temp is lower or higher than the functioning temp, the dehumidifier stops.
When 5°C ≤ Ambient temp . ≤ 16°C, the compressor automatically defrosts at intervals; during
defrosting, the compressor stops and the fan keeps running.
2. BEFORE CALLING FOR SERVICE
Before contacting professional service, please review the trouble shooting list that includes
common occurrences that are not the result of a defect in workmanship or materials.
Problem Possible Cause Solution
Not
working
No power supply
Connect to a functioning outlet and switch
on
Water Full Indication Flashes
Drain water tank and reset it, or
re-position the water tank to right place
Room temperature ˂ 5°C,or
˃
35 °C
Self-Protection designed to protect the
unit. Can not work under such temperature
Bad
functioning
Is the air filter clogged? Clean the air filter as instructed
Is the intake duct or
discharge duct obstructed? Remove the obstruction from the
discharge duct or intake duct.
No air
intake
Is the filter clogged? Wash the filter
Loud noise
when
running
Is the machine put in the plat
place?
Put the machine on the plat ground
Is the filter clogged? Wash the filter
E2 Humidity sensor problem Change a sensor
LO
Environmental humidity is
below 20%
The dehumidifier shuts down for self-
protection
HI
Environmental humidity is
above 90%
CL
Low temperature protection,
the environmental
temperature
＜
5℃