Philco PLDSI 148 A KING, Owner'S Manual

Page: 13 / 104

Copyright © 2020, Fast ČR, a. s. Revision 08/2022
EN - 11
PART 3: OPERATION
p
Quick Start
Caution!
• Before washing, please make sure the washing machine is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove any residual water and to
neutralize potential odors, it’s recommended to clean your appliance before first use. For this reason, start
the Cotton program at 90°C without laundry and detergent.
Calibration
It’s recommended to calibrate the washing machine, so that provide the best performance.
The appliance is able to detect the amount of laundry loaded. This function is optimizing the product
performance by minimizing energy and water consumption, saving you money and time. For this reason it’s
recommended to calibrate the appliance for best use.
1 Remove all accessories from the drum and close the door;
2 Insert the mains plug to the socket;
3 Switch on the washing machine and press “Temp.” and “Soil” simultaneously for 10 seconds until “t19” is
displayed;
4 Press [  ] to start the appliance and wait till “****” is displayed.
1. Before Washing
1 2 3 4 5
Plug in Open tap Load Close door Add detergent
Main
wash
Softener
Prewash
earth
terminal
Note!
• Detergent need to be added in compartment I if the pre-wash function is selected.