Copyright © 2020, Fast ČR, a. s.
Revision 05/2021
16
EN
PART 9: USING THE APPLIANCE
1. Close the door.
2. Press the
button to exit standby mode. You will see the preset setting 200 °C and 15 minutes.
3. Select an automatic program and, if necessary, change the cooking time and the temperature with
the
or
buttons.
4. If you use the frying drum or the rotisserie, additionally press the
button to add the rotisserie.
5. Press the
button to start the cooking process.
Pause Operation
• Press the
button to pause the operation. The
button is flashing. Press the
button again to
resume the operation. The
button is continuously lit again.
• However, the operation will be interrupted when you open the door. Close the door to resume
operation.
NOTE:
The appliance will start from the spot it has been paused.
End of Operation
NOTE:
When the cooking time has elapsed, the fan continues to run to cool down the appliance.
OFF
flashes in the display. After approx. 20 seconds, 3 beeps will sound and
OFF
disappears on the display.
The appliance is again in standby mode.
WARNING: Danger of burns!
• Hot steam can escape!
• Use oven gloves!
1. Open the door.
2.
If you have used the frying drum or the rotisserie spit,
remove it with the removal tool. To do
this, unlock the frying drum or the rotisserie spit using the unlocking mechanism (7) and remove it.
If you have used the baking sheet or the slide-in grids,
pull them out.
3. Place the accessories only on heat-resistant surface!
4. Close the door.
