Philco PDT 67 DF, Owner'S Manual

Page: 17 / 180

Copyright © 2020, Fast ČR, a. s. Revision 10/2021
EN - 15
How to drain excess water from hoses
If the connection to the drain pipe is positioned higher than 1000 mm, excess water may remain in the drain
hose. It will be necessary to drain excess water from the hose into a bowl or suitable container that is held
outside and lower than the sink.
Water outlet
Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks. Ensure that the
water drain hose is not kinked or squashed.
Extension hose
If you need a drain hose extension, make sure to use a similar drain hose.
It must be no longer than 4 meters; otherwise the cleaning effect of the dishwasher could be reduced.
Syphon connection
The waste connection must be at a height less than 1000 mm (maximum) from the bottom of the dishwasher.
Positioning The Appliance
Position the appliance in the desired location. The back should rest against the wall behind it, and the sides,
along the adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses that can
be positioned either to the right or the left sides to facilitate proper installation.
Built-In Installation
Step 1a:
If only the body into cabinets, please make this map the size of the cabinet hole.
min. 555
100
min. 550
min. 458
80
Electrical, drain band water supply
line entrances, both sides
Space of cabinet