Philco PDL25, User Manual

Page: 21 / 24

9
8. Timer
(1)Timer Off:
When appliance is powered on, presses Timer 1H/2H/4H/8H for the reservation of
operating, timer symbol displayed on LED screen.
(2)Time On:
When appliance is powered off, press Timer 1H/2H/4H/8H for power off, timer symbol
displayed on LED screen.
（
4
）
Water Full
When tank is full, device will automatically shut off and buzzer will alarm 10 times. At
the meantime, the LED light of power and “full" illuminate.
（
5
）
Memory function
（
1
）
If user turn off unit and device is in stand-by , the device will memory the last
setting if user turn on again.
（
2
）
If power failure , the machine can not restart automatically and there is no memory
function.
（
3
）
If user set “child lock” and “timer”, device will shut off when time is up , but no
memory on child lock when turn on unit again.
（
6
）
Automatic Defrosting:
If the temperature sensor(NTC) detects that the temperature on the copper tube of
evaporator is
≤
-1
℃
, the compressor will stop and the dehumidifier starts to defrost. The
light of Defrost is illuminated. The compressor will only start working again after 10
minutes’ defrosting and the temperature on the copper tube is
≥
2
℃
, the dehumidifier
will work as the same status as before, the light of Defrost is off.
(Note:
①
, when the dehumidifier is defrosting under “Dehu” mode then the fan motor