20
INSTALLATION
In case of double stack
For stacking the incubators surely, refer to the
procedure included with the optional double
stacking bracket MCO-170PS or the stacking plate
MCO-170SB.
Note:
When stacking incubators, fix two hooks on
the rear of the upper incubator to the wall by wire or
chain, to prevent falling over (Fig. 4).
Note:
When stacking the incubators on our CO
2
incubator or O
2
/CO
2
incubator other than this
product, use the stacking plate MCO-170SB. Refer
to table 11 on page 91.
When the incubator is not in use
Empty the water from the humidifying pan and remove moisture from the chamber. Make sure that the
chamber is completely dry before closing the doors. Failure to do so may result in damage.
Before moving the incubator
Before moving the incubator, empty the water from the humidifying pan, disconnect the power supply plug
from the outlet, and make sure that the cord will not be damaged. Failure to do so may result in electric
shock or fire.
Fig. 5
Hooks
Wire
Summary of Contents for MCO-170AICUVL
Page 2: ......
