Phason Supra-RS, Owner'S Manual

Page: 43 / 152

Configuring the main control functions
21040012 43

You can press the numbers on the keypad to change the day or the year.

If the day of week is wrong, change the day number of the date; the day of week
changes automatically after you save changes.
5.
Scroll to the next line and then press
ENTER
.
6. Enter the correct time using the numbers on the keypad. To change from AM to PM, press the
+
or
–
key. To save the time, press
ENTER
until the cursor returns to the beginning of the line.
To cancel the change, press
BACK
.
7. Scroll to the last line and then press
ENTER
.
8. Press
BACK
twice to return to the Main Menu.
Selecting the temperature units
The Supra can display temperatures in either degrees Fahrenheit (°F) or degrees Celsius (°C), but
not both at the same time. The factory default is °F.
To select temperature units
1. From the Main Menu, select Maintenance .
2. From the Maintenance menu, select Switch F/C (4).
The display shows which unit of measure the Supra is using.
3. Scroll to the second line and then press
ENTER
.
4. Press
+
or
–
to change the setting to the other unit of measure.
5. To save the setting, press
ENTER
. To cancel the change, press
BACK
.
6. Press
BACK
twice to return to the Main Menu.
Changing the type of temperature probe
The Supra comes with a Phason 3K temperature probe – the standard for most Phason controls. If
you want to connect a 1K probe, you need to tell the Supra that you have connected a different type
of probe.
By default, the Supra is set to
normal
for 3K temperature probes. You need to select the type of
probe
only if you are not using
a standard Phason 3K temperature probe. A 1K probe is typically
used in (embedded inside) heat mats, such as, Master Mat.