AxN Configurable Motion Control Platform
26
Wiring and Torque Specification
Connect the 4 wires of the AC power supply cable to the correspond terminals on the P1 port:
T to
T, S to S, R to R and PE to PE
.
Cable Fixing
Use a hose clamp to fix the cable on the cable support. For AxN 09.20.4 drive, the nominal torque
to tight these terminals is 0.5 ~ 0.6 N
∙
m.
AC Power Supply Cable Installation
4.2.4
DC Power Supply Input
DC Power Supply Requirement
Main Supply
AxN 09.20.4
Voltage
565V
Type
DC power
Fluctuation of Voltage
0 ~ 800V
Nominal Current Output
9A
Peak Current Output
20A
Nominal Power at 565V
6.3KW
Peak Power at 565V
13.8KW
Note: please do not install filters, reactors and other equipment between DC power and AxN
drive. Connect DC power and AxN drive directly with the power line.
Summary of Contents for AxN
Page 1: ......
