phase II+ 221 Series, Operating Instructions & Parts Manual, Page: 22 / 24

Operating Instructions & Parts Manual
Pg. 22
Rotary Table/Lathe Chuck Adapter Plates
Table
±
221-304
221-306 221-308 221-310 221-312 221-316
Size 4” Table 6” Table 8” Table 10” Table 12” Table 16” Table
Plate 221-354 221-356 221-358 221-360 221-362 221-366
Lathe
Chuck
559-110
3”
559-112
5”
559-113
6”
559-114
8”
559-115
10”
559-116
12”
4” Rotary Table / 4” Adapter Plate / 3” Lathe Chuck
6” Rotary Table / 6” Adapter Plate / 5” Lathe Chuck
8” Rotary Table / 8” Adapter Plate / 6” Lathe Chuck
10” Rotary Table / 10” Adapter Plate / 8” Lathe Chuck
12” Rotary Table / 12” Adapter Plate / 10” Lathe Chuck
16” Rotary Table / 16” Adapter Plate / 12” Lathe Chuck
Mounting Instructions:
Make sure the “step” on the adapter plate goes to the back side of the lathe chuck.
Connect using mounting bolts that are supplied with the lathe chuck.
Carefully place the plate/chuck assembly on the rotary table face plate and line up the
holes in the adapter plate with the T-slots on the rotary table. Connect using the T-nuts
and bolts that are supplied with the adapter plate.
Center the plate and tighten bolts.
+
+
=