Installation and Configuration Guide
Setting up Omega PS200 Hardware
12
Connecting the PS200 hardware components
Maintaining good cable management is essential to a successful installation. The PS200 package comes
with cables bundled in a wire loom. One end of the loom will plug into the PS200 Touchscreen and the
other end will plug into the network cables, power adaptor, and Copy Link (if required). Using the
bundled cables in the wire loom, you can now connect the cables.
1.
Connect all four plugs to the PS200 Touchscreen as per diagram
2.
Connect the other end of the wire loom as per diagram:
