Display screen
：
LCD
：
6
、
Control system description
Lamp power supply & connection of signal line
1
、
Connection and control of the lamp power source
The product use s 1.5 SQMM copper core cables to be the input line for power
supply. When connecting the power line, the maximum of connecting lamps is 12
under voltage 220V; and the maximum of connecting lamps is 6 under voltage 110V.
When using the DMX console, the length of wire between console and the lamp,
and the length of wire between the lamps should not be longer than 60 meters.
There must be signal amplifier when the length of wire is longer than 60 meters.
2
、
Connection of the lamp signal line
This LED lamp receive digital signal in DMX512 (1900) format. It can work in
either the master or slaver mode under EDIT and self-propelled mode. The master
-slave mode also connects by DMX line. Using the cylindrical 3 core XLP cable
provided by the manufacturer,
connect the XLR-XLR control line from the DMX
controller output port to the DMX input port of 1st lamp, then from the DMX
output port of 1st lamp to the DMX input port of 2nd lamp, etc. Until all the
lamp s are connected in a chain . Finally insert the loop into the DMX input port
of last lamp for complete the connection.
