When the current temperature passes over the temperature protection value,
the lamp will slowly reduce to half-power ; when the current temperature
return s to normal range, the lamp will slowly return to full power ;
Press
【
MENU
】
for about 3 seconds under
【
DMX
】，
it can quickly close optical
mode
selection
，
press“UP”or“DOWN”to
select“YES”to
open
the
mode
，
“NO”to stop it.
Channel description
CH2 mode function table
（
2-channels
）
Channel
Main
function
Value
Description
CH1
H
0-255
R
、
G
、
A illuminance adjusting
CH2
L
0-255
B
、
W
、
Y illuminance adjusting
Master-slave model
Connect the control line from the DMX output port of 1st lamp to the DMX
input port of 2nd lamp, then from the DMX output port of 2nd lamp to the DMX
input port of 3rd lamp, etc. Until all the lamps are connected in a chain.
Finally insert the loop into the DMX input port of last lamp for complete the
connection. Choose the 1st lamp to function as the master, and run it in the
Self-propelled Mode or EDIT mode; other lamps will work as slaves with the same
effect, and run them in the Slave Mode or Address code Mode. Note: the DMX
input port should not input the DMX512 signal
8
、
Safety instructions
1.Maintenance
：
The lamp has been passed strict examination before leaving the factory.
In order to ensure the normal and safe operation, user must follow the
instructions of this manual ;
Ilightings
assumes
no
responsibility
for those
products
that
have
refitted by the customers ,and the troubles resulting from customer's
