Network Dome Camera
·
Quick Start Guide
20
20
4.
Route the cables through the cable hole on adapter plate and
secure the adapter plate to the cap.
Fixing Screw
Figure 2-14
Install Adapter Plate to Bracket
5.
Repeat step 4 to step 10 of Section 2.3.1 Ceiling Mounting to
complete camera installation.
2.3.3
Pendant Mounting
Before you start:
Pendant mounting bracket is not included in package. If you choose
this mounting type, you have to prepare a bracket first. The pendant
mounting bracket shown below is only for demonstration.
Note:
When choosing a pendant mounting bracket, you must pay attention
to the size of the cap which should match the adapter plate of the
camera. See Figure 2-3.
Steps:
1.
Route the cables and Install the pendant mounting bracket.
2.
Install the cap to the bracket. Secure the cap with a fixing screw.