INSTALLATION GUIDE V1.0
intel cpu block
GLACIER C360i
PH-C360i_01
PACKAGE CONTENTS
WARNING
-
This product is intended for advanced users. Improper installation may result in damage to your equipment. While all efforts have
been made to provide the most comprehensive information possible, Phanteks assumes no liability expressed or implied for any damage(s) occurring to your
components as a result of using Phanteks cooling products, either due to mistake or omission on our part in the below instructions, or due to failure or defect in
the Phanteks cooling products. Do not disassemble the water block. Warranty will be voided.
Turn off the power to your system and discharge your body’s static electric charge before proceeding with the installation procedure. If you do not feel comfortable
with performing the installation procedure, consult a qualified computer technician.
For latest version check www.Phanteks.com
STEP 1. BACKPLATE INSTALLATION
SOCKET 115x INSTALLATION (for socket 2011-3, go to step 2)
STEP 2. THERMAL PASTE APPLICATION
GLACIER C360i
QTY: 1
CPU Backplate
QTY: 1
115x Mounting Screw
QTY: 4
Cover Plates BK/CR
QTY: 2
2011-3 Mounting Screw
QTY: 4
115x Standoff
QTY: 4
Spring & Washer
QTY: 4
Phanteks D-RGB Cable
QTY: 1
Phanteks Thermal Paste
QTY: 1
D-RGB MB Adapter
QTY: 1
2.5mm Allen Key
QTY: 1
The CPU Backplate is secured with the 4x
115x Standoffs to the motherboard.
Make sure the backplate orientation
matches the CPU socket:
Apply a pea-size drop of thermal paste to
the center of the CPU.
4x
