INSTALLATION GUIDE V1.0
AMD AM4 cpu block
GLACIER C360A
PH-C360A_01
PACKAGE CONTENTS
WARNING
-
This product is intended for advanced users. Improper installation may result in damage to your equipment. While all efforts have
been made to provide the most comprehensive information possible, Phanteks assumes no liability expressed or implied for any damage(s) occurring to your
components as a result of using Phanteks cooling products, either due to mistake or omission on our part in the below instructions, or due to failure or defect in
the Phanteks cooling products. Do not disassemble the water block. Warranty will be voided.
Turn off the power to your system and discharge your body’s static electric charge before proceeding with the installation procedure. If you do not feel comfortable
with performing the installation procedure, consult a qualified computer technician.
For latest version check www.Phanteks.com
STEP 1. BACKPLATE INSTALLATION
STEP 2. THERMAL PASTE APPLICATION
GLACIER C360A
QTY: 1
Cover Plates BK/CR
QTY: 2
AM4 Mounting Screw
QTY: 4
AM4 Standoff
QTY: 4
Spring & Washer
QTY: 4
Phanteks D-RGB Cable
QTY: 1
Phanteks Thermal Paste
QTY: 1
D-RGB MB Adapter
QTY: 1
2.5mm Allen Key
QTY: 1
The original CPU backplate is secured with
the 4x Standoffs to the motherboard.
Apply a pea-size drop of thermal paste to
the center of the CPU.
4x
