08
July 27, 09 K.Okada
A.Miyoshi I.Fujioka
Refer to Revision Record on page 2.
TITLE
fi-6140/fi-6240/fi-6130/fi-6230/fi-614PR
Maintenance Manual
07
Nov.12, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
CUST.
06
Mar.10, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
DRAW
No.
P1PA03540-B0XX/6
Rev. DATE DESIGN CHECK APPR. DESCRIPTION
Design
July 27, 2007
K.Okada
CHECK
K.Okada
APPR.
T.Anzai
PFU LIMITED
Page
255
/
257
07 Appendix 2
Appendix 2 Emulation Mode
Emulation of the following scanners can be specified on this scanner.
Model name
Scanner that can be emulated
fi-6140
fi-6130
fi-4120C, fi-4120C2, fi-5120C
fi-6240
fi-6230
fi-4220C, fi-4220C2, fi-5220C, fi-4340C
To activate the Emulation function, scanner setting needs to be changed.
For the configuration method, see below.
1. With the ADF cover open and the Empty sensor status ON (by opening the cover all the way), press the Power button while
pressing the Function button. (In this mode, the scanner interface with the host becomes off-line.)
The following is the Function Number Display and the scanner status transition during scanner initialization after the power is
turned ON in the procedure above.
Function
No. Display
Scanner status
Initializing
Function
No. Display
Scanner status
In Maintenance Mode
Function
No. Display
Scanner status
In Emulation switch mode
ADF cover
Open ADF cover
completely.
Empty sensor
・
Status: ON
- When the scanner goes into the Emulation
switch mode, close the ADF cover.
- When the scanner goes into the Maintenance
Mode, let go of the Function button.
