08
July 27, 09 K.Okada
A.Miyoshi I.Fujioka
Refer to Revision Record on page 2.
TITLE
fi-6140/fi-6240/fi-6130/fi-6230/fi-614PR
Maintenance Manual
07
Nov.12, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
CUST.
06
Mar.10, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
DRAW
No.
P1PA03540-B0XX/6
Rev. DATE DESIGN CHECK APPR. DESCRIPTION
Design
July 27, 2007
K.Okada
CHECK
K.Okada
APPR.
T.Anzai
PFU LIMITED
Page
172
/
257
Section 6-1-7
6-1-7 Maintenance mode #6: Miscellaneous information display
In this mode, the following information counter is displayed:
•
Firmware version number
•
Starting date of the scanner *
•
The accumulated number of paper that have been scanned by ADF
•
The accumulated number of paper that have been scanned by FB (fi-6240/fi-6230 only)
*: This indicates the date when the scanner is activated by the driver first. This information is only available if the driver supports
this function.
[How to start]
(1) Selects Maintenance mode #6 in screen T04 and press Scan/Stop button. A number appears on the Function No. Display
indicating the information.
Function No.
Display
Display
Remarks
0 Firmware
version
Default
1
Starting date of the scanner
2
The accumulated number of paper scanned by ADF
3
The accumulated number of paper scanned by FB
FB models (fi-6240/fi-6230) only
(2) Change the selection by pressing Function button.
(3) The information is displayed as follows when pressing Scan/Stop button.
Information
Display
Firmware version number
The firmware version number is displayed in 4 digits from left digits to
right digits, following the symbol “-“.
Without Imprinter installed
(example)
:
eg. When the scanner version is “A00” (*1), “A” is converted to “01”
(*2), so the scanner displays “-0100” in the following order:
“-”
Æ
“0”
Æ
“1”
Æ
“0”
Æ
“0”
“A” is converted to ”01” (*2)
With Imprinter installed
(example)
:
eg. When the scanner version is “B00” and the Imprinter version is
“A00” (*1), “P” and the Imprinter version is indicated after the scanner
version. But the Imprinter version will not be indicated if the scanner
version is J00 or younger.
“-”
Æ
“0”
Æ
“2”
Æ
“0”
Æ
“0”
Æ
“P”
Æ
“0”
Æ
“1”
Æ
“0”
Æ
“0”
Imprinter firmware version
Starting date
Starting date of the scanner is displayed in 6 digits, 2 digits for “Year
(Christian calendar)”, 2 digits for “Month”, and 2 digits for “Date”,
following the symbol “-“. You cannot reset the date.
eg. When the starting date is January 31st, 2002, “020131” is displayed
in the following order:
“-”
Æ
“0”
Æ
“2”
Æ
0
Æ
“1”
Æ
“3”
Æ
“1”
The accumulated number of paper
scanned by ADF
The accumulated number of paper scanned by ADF is displayed in 8
digits from left digits to right digits, following the symbol “-“. (If the
counter does not reach 8 digits, 0 is added to blank digits.)
The counter increments by 10.
You cannot reset this counter.
eg. When the accumulated number is “16,245”, “00016240” is
displayed in the following order:
“-”
Æ
“0”
Æ
“0”
Æ
“0”
Æ
“1”
Æ
“6”
Æ
“2”
Æ
“4”
Æ
“0”
The accumulated number of paper
scanned by FB
The accumulated number of paper scanned by FB is displayed in 8
digits from left digits to right digit. See above (ADF).
