08
July 27, 09 K.Okada
A.Miyoshi I.Fujioka
Refer to Revision Record on page 2.
TITLE
fi-6140/fi-6240/fi-6130/fi-6230/fi-614PR
Maintenance Manual
07
Nov.12, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
CUST.
06
Mar.10, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
DRAW
No.
P1PA03540-B0XX/6
Rev. DATE DESIGN CHECK APPR. DESCRIPTION
Design
July 27, 2007
K.Okada
CHECK
K.Okada
APPR.
T.Anzai
PFU LIMITED
Page
10
/
257
Section 1-1
Chapter 1 Overview
1-1 Specification
1-1-1 Features
The fi-6140/fi-6240/fi-6130/fi-6230 (hereinafter called “the scanner”) offers high-speed color/gray/monochrome scanning
with 600 dpi of optical resolution, up to A4 size (Legal size for ADF). It supports two interfaces, SCSI interface and USB
interface, either of which can be used at a time.
The following points have been improved for the scanner compared to the previous type (fi-5120C/fi-5220C).
(1) Improvement of color scanning speed
By changing the CCD, color scanning speed (A4 Portrait 300dpi) is improved from 30 ppm to 40 ppm.
(2) Ultrasonic multi feed sensor
As with the previous model, the scanner introduces ultrasonic sensor in order to perform very reliable multi feed
detection.
(3) Prevention of image chipping at overscan
Increasing the number of CCD pixels enables to extend overscan width, so that the image will not be chipped even
when the document is skewed.
(4) Thicker
card
transportation
Feeding thick cards up to 1.4mm thick (including emboss) is available by improving the ADF transportation path.
(5) Specified number of scanned pages ejected to the stacker
Pre-pick is operable when the number of documents to be scanned is specified.
An exclusive imprinter (fi-614PR, option) can be installed under fi-6140/fi-6130 as shown in the photo below.
See Chapter 8 for the details of the imprinter.
Imprinter
Scanner
fi-6140/fi-6130
