6
2.1
Summary
The user data is managed on an LDAP server which supports the X.500 directory protocol service.
This section describes the following user data.
•
User Name
•
Password
•
E-mail Address
When using a LDAP server, set the following data on the LDAP server.
To connect the scanner to the LDAP server, login as the administrator and set the
[Network Settings] - "LDAP Server" settings.
Info
Save in ...
Used to ...
User Name
LDAP server
Set the user name
Password
LDAP server
Set the password
E-mail Address
LDAP server
Set the e-mail address
Setting
Used to ...
Server Name
IP Address
Set an LDAP server name or IP address.
Search Base (DN)
Set the top level DN path on the LDAP server used for search-
ing user data. Set according to the user data on the LDAP
server. Optimizing the search base DN level enables the LDAP
server to search most efficiently.
Maximum Results
Set the maximum number of results for LDAP List searches.
Search Timeout
Set the LDAP list searches timeout delay.
