PFS BRO18NG Installation & Operation Manual Download Page 1

INSTALLATION & OPERATION MANUAL 

 GAS FIREPLACE LOG 

    

TIERED DUAL BURNER LOG SET

Complies with ANS Z21-84 2017

C

SHM INTERNATIONAL 2017

Burner set for use with these styles and sizes of SureHeat Dual Burner Natural Gas Log Sets. 

Models: BRO18NG, BRO24NG - CSO24NG, CSO30NG

      MO18DBNG, MO24DBNG -  SH18NG, SH24NG

DECORATIVE VENTED

           

— Do not store or use gasoline or other 

ammable vapors and liquids in the

     vicinity of this or any other appliance.

— WHAT TO DO IF YOU SMELL GAS

   • Do not try to light any appliance.

   • Do not touch any electrical switch; do not use any phone in your building.

   • Immediately call your gas supplier from a neighbor’s phone. Follow the gas 

     supplier’s instructions.

   • If you cannot reach your gas supplier, call the fire department.

— Installation and service must be performed by a quali

ed installer, service

     agency or the gas supplier.

WARNING:

If the information in this manual is not followed exactly, a 

re or 

explosion may result causing property damage, personal injury or loss of life.

Installation of this Energy Efficient Gas Log Set and provisions for combustion and ventilation air

must conform with the National Fuel Gas Code ANSI Z223.1/NFPA54, and any local codes. 

PFS

®

US

May be used with accessory valve kits: MBV300 (Manual Ball Valve) CVS303 and RVS304

(Safety Pilot Kits) Safety Pilot Kits also used for LP gas conversion - add ACC18 Burner Media 

INSTALLER:

 Leave this manual with the appliance.

CONSUMER:

 Retain this manual for future reference.

WARNING:  This  product  contains and/or  generates  chemicals  known to       

  the State of California to cause cancer or birth defects, or other reproductive harm.    

    

Summary of Contents for BRO18NG

















Reviews: